Assembly Instruction

COMPONENTS

1 Carefully remove all components from box and

remove all plastic coverings. Place base unit onto a

clean, padded surface. Remove socket ring from base

unit and place bottom ring of shade support onto

threaded socket. Secure with socket ring.

Made in China - r02 Page 1 of 2

Thank you for purchasing the Insight Table Lamp.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

INSIGHT TABLE LAMP

1 - finial

2 Install 1- canelabra base bulb (60 watt max) into socket.

1 - socket ring

1 - lampshade

1 - base unit

1 - shade

support

socket ring

shade support

base unit

1 - candelabra

base bulb

(60 watt max)

socket

1 - washer

1 - candelabra

base bulb

(60 watt max)

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

PAGE 1
INSIGHT TABLE LAMP COMPONENTS 1 - shade support 1 - lampshade 1 - finial 1 - socket ring 1 - washer 1 - candelabra base bulb (60 watt max) Thank you for purchasing the Insight Table Lamp. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
INSIGHT TABLE LAMP finial B A washer 3 A) Carefully lower lampshade over assembled unit and fit threaded bolt of shade support into corresponding hole of lampshade as shown. B) Secure lampshade with washer and finial. Turn finial clockwise to secure. lampshade Assembly is now complete. CLEANING & CARE Do not use polishes or cleaners on your lamp. Dust surfaces with a dry soft cloth.