Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Kipling Buffet with Hutch Top

Customer Service 800.967.6696 | www.crateandbarrel.com

Made in Indonesia - r08 Page 1 of 2

Thank you for purchasing the Kipling Buffet and Hutch

Top. This page

lists all the contents included in the box.

Please take the time

to identify the hardware as well as the

individual components

to this product. As you unpack and

prepare for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387

for replacements.

COMPONENTS

KIPLING BUFFET AND HUTCH TOP

phillips head screwdriver

1 - hutch 1 - buffet

ASSEMBLY HARDWARE

FOR BUFFET

ASSEMBLY HARDWARE FOR HUTCH

2 - connecting

plates

6 - small

screws

2 - large

screws

2 - wall

straps

2 - plastic

anchors

4 - wall

fittings

2 - small

screws

2 - large

screws

2 - wall

straps

2 - plastic

anchors

4 - wall

fittings

For added safety and stability, it is recommended that the wall

mounting hardware be installed. For safe mounting, it is

essential to use wall anchors appropriate to your wall type (i.e.

plaster, drywall, concrete, etc.). Mount to wood studs whenever

possible.

A) Attach 1 wall fitting to assembled unit as shown, using 1

small screw.

B) Determine the final location of unit. Mark position on the wall,

approximately 2" below the bracket mounted to the back of the

unit.

C) Drill a pilot hole in the wall stud. If the wall stud is not

available, drill a hole in the wall that is slightly smaller in diameter

than the anchor. Gently tap the plastic anchor until the flange of

the anchor is flush with the wall.

D) Attach the wall fitting to the wall by inserting 1 large screw

through the wall fitting and into the plastic anchor in the wall.

E) Place the unit so the wall fitting on the back edge is aligned

with the wall fitting on wall.

F) Lace one end of the wall strap through both fittings, and into

the other end of the strap.

G) Pull the strap tightly until secure.

H) Repeat steps A-G for remaining wall fitting and wall strap.

Wall mounting assembly is now complete.

NOTE:

If you are unsure about your wall type or what

mounting method you should use, consult a

qualified professional or your local hardware store.

wall fitting &

small screw

wall strap

plastic

anchor

large screw

WALL MOUNTING ASSEMBLY WITHOUT HUTCH

Summary of content (2 pages)

PAGE 1
KIPLING BUFFET AND HUTCH TOP ASSEMBLY HARDWARE FOR BUFFET Missing hardware? Please call 800.606.6387 for replacements. 2 - small screws 2 - plastic anchors 2 - large screws 2 - wall straps 4 - wall fittings ASSEMBLY HARDWARE FOR HUTCH 6 - small 2 - large 2 - wall screws screws straps 2 - plastic 4 - wall anchors fittings 2 - connecting plates TOOLS REQUIRED phillips head screwdriver Thank you for purchasing the Kipling Buffet and Hutch Top. This page lists all the contents included in the box.
PAGE 2
KIPLING BUFFET AND HUTCH TOP ASSEMBLY WITH HUTCH hutch buffet CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. 1 With assistance of another adult, carefully place hutch onto buffet as shown. Attach 2 connecting brackets to back of assembled unit with 3 small screws per bracket as shown. Secure screws with a phillips head screwdriver.