Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Ledge Chiffonier

COMPONENTS

Made in Malaysia - r08 Page 1 of 5

Thank you for purchasing the Ledge Chiffonier. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

LEDGE CHIFFONIER

5 - drawer

backs

1 - top panel 1 - base

10 - drawer side

panels (5 left, 5 right)

2 - side panels

(1 left, 1 right)

1 - back panel

5 - drawer

fronts

ASSEMBLY HARDWARE

TOOLS REQUIRED

Missing hardware? Please call

800.606.6387 for replacements.

14 - wood

dowels

6 - small

bolts

6 - large

bolts

phillips head screwdriver

1 - bottom

panel

16 - small

screws

2 - large

screws

2 - wall

straps

4 - wall

brackets

2 - plastic

anchors

(We recommend the use of hand tools instead power tools)

allen wrench (included)

WALL MOUNTING HARDWARE

40 - drawer

screws

8 - large

screws

4 - adhesive

feet

5 - drawer bottoms

2 - small

screws

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 - crossbar

2 - cam

screws

2 - cams

Summary of content (5 pages)

PAGE 1
LEDGE CHIFFONIER ASSEMBLY HARDWARE 6 - small bolts 14 - wood dowels 6 - large bolts 2 - cam screws Missing hardware? Please call 800.606.6387 for replacements. 40 - drawer screws 16 - small 8 - large screws screws 2 - cams 4 - adhesive feet WALL MOUNTING HARDWARE 2 - small screws Thank you for purchasing the Ledge Chiffonier. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
LEDGE CHIFFONIER NOTE: Do not over tighten screws NOTE: Do not over tighten the cam screw adhesive foot B left and right side panels B A base A bottom panel 1 A) Place left and right side panels onto a clean, padded surface. Insert 6 wood dowels into left and right side panels as shown. B) Insert 1 cam screw into left and right side panels as shown. Secure, but do not over tighten, cam screw with a phillips head screwdriver. 2 A) Attach base assembly to bottom panel with 8 large screws as shown.
PAGE 3
LEDGE CHIFFONIER left side panel NOTE: Do not over tighten the bolts NOTE: Allen wrench can be held at an angle to allow for full rotation when securing bolts top panel right side panel 5 Position base assembly as shown. With the assistance of another adult, fit dowels of left and right side panels into corresponding holes of bottom panel as shown. Secure left and right side panels with 3 large bolts per side, using an allen wrench. Do not over tighten the bolts.
PAGE 4
LEDGE CHIFFONIER drawer right side panel drawer bottom 9 Fit drawer bottom into grooves of assembled drawer as shown. 10 Attach drawer right side panel to drawer front and drawer back with 4 drawer screws as shown. Repeat steps 8-10 for remaining drawer assemblies. 11 Fit drawer glides of drawer assemblies into corresponding glides of dresser as shown. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
PAGE 5
LEDGE CHIFFONIER SAFETY MOUNTING INSTRUCTIONS: For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store.