Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel Ledge Nightstand

COMPONENTS

Made in Malaysia - r06 Page 1 of 4

Thank you for purchasing the Ledge Nightstand. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

LEDGE NIGHTSTAND

2 - drawer

backs

1 - top panel 1 - base

1 - fixed

panel

2 - side panels

(1 left, 1 right)

1 - back panel 2 - drawer

fronts

ASSEMBLY HARDWARE

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387

for replacements.

12 - wood

dowels

10 - small

bolts

6 - large

bolts

phillips head screwdriver

1 - bottom

panel

12 - small

screws

(We recommend the use of hand tools instead power tools)

allen wrench (included)

16 - drawer

screws

8 - large

screws

4 - adhesive

feet

2 - drawer bottoms4 - drawer sides

(2 left, 2 right)

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (4 pages)

PAGE 1
LEDGE NIGHTSTAND ASSEMBLY HARDWARE 10 - small 6 - large bolts bolts 16 - drawer screws Thank you for purchasing the Ledge Nightstand. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
LEDGE NIGHTSTAND NOTE: Do not over tighten screws B adhesive foot left and right side panels A base bottom panel 1 Place left and right side panels onto a clean, padded surface. Insert 6 wood dowels into left and right side panels as shown. 2 A) Attach base assembly to bottom panel with 8 large screws as shown. Secure, but do not over tighten, screws using a phillips head screwdriver. B) Adhere 4 adhesive feet to legs as shown.
PAGE 3
LEDGE NIGHTSTAND A B fixed panel VIEW FROM BACK NOTE: Allen wrench can be held at an angle to allow for full rotation when securing bolts B back panel 5 A) Position fixed shelf into assembled unit as shown. B) Secure fixed shelf to assembled unit with 4 small bolts as shown. 6 Attach back panel to assembled unit with 12 small screws as shown, using a screwdriver.
PAGE 4
LEDGE NIGHTSTAND drawer right side panel 9 Attach drawer right side panel to drawer front and drawer back with 4 drawer screws as shown. Repeat steps 7-9 for remaining drawer assembly. 10 Fit drawer glides of drawer assemblies into corresponding glides of dresser as shown. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.