Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China r07 Page 1 of 3

Thank you for purchasing the Loop Storage Bench.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

NOTE: 2 people are required to safely assemble this

product.

LOOP STORAGE BENCH

Missing hardware? Please call 800.606.6387 for replacements.

14 - cam

screws

18- large

screws

8 - small

screws

12 - wood

dowels

14 - cam

covers

14 - cams

3 - hinges

2 - lid

supports

(1 left,

1 right)

4 - bumpers

Phillips Head Screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

1 - top panel

2 - side frames

(1 left, 1 right)

1 - back panel

1 - front panel

1 - bottom panel

PAGE 1
LOOP STORAGE BENCH HARDWARE 14 - cams 12 - wood dowels Thank you for purchasing the Loop Storage Bench. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. NOTE: 2 people are required to safely assemble this product.
PAGE 2
LOOP STORAGE BENCH Arrow on each cam points towards nearest edge with holes A Back Panel B Front Panel 1 A) Place back panel face up on a padded surface as shown. Insert 2 wood dowels, 3 cam screws, and 4 cams into the holes as shown. Secure each cam screw, but do not over tighten with a phillips head screwdriver. Make sure the arrow on each cam points towards the nearest edge with holes. B) Insert 2 wood dowels, 3 cam screws, and 4 cams into the front panel.
PAGE 3
LOOP STORAGE BENCH NOTE: When attaching the left and right lid supports, make sure it bends towards the front of the cabinet. B A 5 A) With the assistance of another adult, carefully turn case assembly right side up and fit right and left side frames onto assembly. Secure all 8 cams on the front and back panel with a phillips head screwdriver. B) Conceal all exposed cams with cam covers. 6 Attach left and right lid supports to the inside of each side frame with 2 small screw per support as shown.