Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r08 Page 1 of 3

Thank you for purchasing the Loop Desk. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and

prepare for assembly, place the contents on a carpeted

or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

LOOP DESK

Missing hardware? Please call 800.606.6387 for replacements.

6 - wood

dowels

6 - cams

6 - bolts6 - cam

screws

4 - silver

screws

2 - pulls

allen wrench (included)phillips head screwdriver

Customer Service 800.967.6696 | Latest instructions available on www.crateandbarrel.com

2 - side frames

(1 left, 1 right)

1 - desktop

assembly

1 - crossbar

PAGE 1
LOOP DESK HARDWARE 6 - wood dowels 6 - cams 4 - silver screws 2 - pulls 6 - cam screws 6 - bolts Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Loop Desk. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
LOOP DESK C D right side panel NOTE: Make sure arrows on each cam point towards nearest edge with holes cam screws C wood dowels B cams NOTE: Do not over tighten the cam screws or bolts E B desktop assembly E D bolts A drawer 1 A) With the assistance of another adult, carefully pull out drawer from desktop assembly as shown. Set drawer aside. B) Insert 4 cams into desktop assembly as shown. Make sure arrows on each cam points toward the nearest edge with holes.
PAGE 3
LOOP DESK NOTE: Do not over tighten the screws drawer pull 3 With the assistance of another adult, carefully position unit upright. Attach 2 pulls to drawer front with 2 screws per pull. Secure screws, but do not over tighten, with a screwdriver. Assembly is now complete. REMOVING DRAWER ASSEMBLY A) Remove drawer assembly from desk: Fully extend drawer assembly from desk. Locate plastic tabs on left and right drawer glides.