Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Loop File

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r08 Page 1 of 2

Thank you for purchasing the Loop File. This page lists

all the contents included in the box. Please take time

to identify the hardware as well as the individual com-

ponents of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

LOOP FILE

Missing hardware? Please call

800.606.6387 for replacements.

4 - pull

screws

1 - file

cabinet

2 - pulls

pull

file

cabinet

2 - file rails

1 Pull out each drawer from file cabinet. Attach 1 pull to

each drawer with 2 screws as shown. Secure screws with

a phillips head screwdriver.

2 Please remove packing foam located between each

drawer assembly and file cabinet as shown. If packing

foam is difficult to remove, detach drawer assembly from

drawer glides. For instructions on removing/attaching

drawer assembly, refer to diagram on page 2.

file

cabinet

drawer

assembly

phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

1 - plastic

anchor

1 - large

screw

1 - wall

strap

1 - small

screw

foam

12 A) Fully extend drawer glides from assembled unit as

shown.

B) Position drawer assembly and rest the drawer assembly

on top of the tabs as shown. Attach each glide to drawer with

2 glide screws as shown. Secure with a screwdriver.

C) Conceal all exposed cams with cam covers.

Assembly is now complete.

Summary of content (2 pages)

PAGE 1
LOOP FILE HARDWARE Missing hardware? Please call 800.606.6387 for replacements. 4 - pull screws 1 - plastic anchor 2 - file rails 1 - small screw 1 - wall strap 1 - large screw TOOLS REQUIRED phillips head screwdriver COMPONENTS Thank you for purchasing the Loop File. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
LOOP FILE A Insert file rails into outer notches Insert file rails into inner notches A left drawer glide B A B Legal Hanging Files A) Remove drawer assembly from file pedestal: Fully extend drawer assembly from file cabinet. Locate plastic tabs on left and right drawer glides. With even pressure, simutaneously lift the left tab (A) and press the right tab (B) to release drawer assembly from assembled unit.