Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Loop Floor Mirror

LOOP FLOOR MIRROR

1 A) Insert 4 wood dowels into each side panel as shown.

B) Insert 4 cams into each side panel as shown. Make sure

arrow on each cam points towards nearest edge with holes.

C) Insert 4 cams and 1 wood dowel into the base panel.

Made in China r06

Page 1 of 3

Thank you for purchasing the Loop Floor Mirror. This

page

lists all the contents included in the box. Please

take the time

to identify the hardware as well as the

individual components

to this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

TOOLS REQUIRED

Missing hardware? Please call 800.606.6387 for replacements.

HARDWARE

COMPONENTS

1 - mirror frame

2 - side panels

(1 left, 1 right)

1 - base panel

9 - wood

dowels

12 - cam

screws

12 - cam

covers

12 - cams

Phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

Arrow on

each cam

points towards

nearest edge

with holes

1 - plastic

wall anchors

1 - long

wood screw

1 - wall

anchor strap

1 - short

wood screw

Summary of content (3 pages)

PAGE 1
LOOP FLOOR MIRROR HARDWARE Thank you for purchasing the Loop Floor Mirror. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
LOOP FLOOR MIRROR NOTE: Do not over tighten the cam screws SIDE VIEW side panels cams base panel* A *NOTE: Make sure tapered edge of the base panel fits against the mirror frame. B 2 A) Insert 2 cam screws into each side panel as shown. Secure, but do not over tighten with a phillips head screwdriver. B) Attach 8 cam screws to the mirror frame as shown. 4 With the assistance of another adult, place mirror frame face down on a clean, padded surface.
PAGE 3
LOOP FLOOR MIRROR NOTE: This floor mirror is intended for placement against a wall using the enclosed anchoring hardware. The included hardware is for mounting the unit to drywall. Use hardware appropriate to your wall type. Short wood screw Wall Wall anchor strap Plastic wall anchor 6 A. Drill a hole in the wall slightly smaller than the diameter of the plastic wall anchor. Lightly tap with a hammer until the face is flush with the wall. B.