Assembly Instruction

Made in China - r11 Page 2 of 4
3 A) Fit dowels of shelf into corresponding holes in back
panel.
B) Carefully align shelf assembly with cam screws of left side
frame and firmly fit into position.
4 Secure 2 cams at the base of the shelf assembly and 2
cams along the side of the back panel with a phillips head
screwdriver. Turn each cam clockwise until it securely
engages each cam screw.
LOOP NIGHTSTAND
1 A) Place left side panel face down on a padded surface.
Insert 5 cam screws into the holes as shown. Secure, but do
not over tighten with a phillips head screwdriver.
B) Insert 2 cams into the large holes as shown, making sure
the arrow on each cam points towards the nearest edge with
holes.
C) Insert 2 wood dowels into the holes as shown. Press
firmly to secure.
Repeat Steps A & B for the right side panel.
2 A) Insert 6 wood dowels and 6 cams into back panel as
shown.
B) Insert 6 wood dowels and 4 cams into shelf as shown.
C) Insert 2 wood dowels and 2 cams into crossbar as shown.
Shelf
Back Panel
Crossbar
A
B
Arrow on each
cam points towards
edge with holes
A
B
C
A
B
Cam in
unlocked
position
Cam in
locked
position
C
Customer Service 800.967.6696 | www.crateandbarrel.com