Assembly Instruction

Made in China - r11 Page 3 of 4
7 A) Insert 6 cam screws into the underside of the top
panel.
B) Place assembly upright. Fit top panel onto dowels of the
assembly and secure each cam with a phillips head screw-
driver.
8 Slide left and right drawer sides up into slots on back of
the drawer front. Make sure glide hardware is on the outside
of the drawer sides and the vertical slots are at the back of
the assembly as shown.
LOOP NIGHTSTAND
5 Fit the crossbar onto cam screw of the side panel as
shown. Secure the cam by turning clockwise with a phillips
head screwdriver.
6 Fit cam screws of right side panel into corresponding
holes in the assembly. Secure each cam with a phillips head
screwdriver.
A
B
Customer Service 800.967.6696 | www.crateandbarrel.com