Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel Lyric Round Dining Table

1

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r05 Page 1 of 2

Thank you for purchasing the Lyric Round Dining

Table. This page lists all the contents included in the

box. Please take time to identify the hardware as well

as the individual components of this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

LYRIC ROUND DINING TABLE

Missing hardware? Please call

800.606.6387 for replacements.

4 - barrel

nuts

4 - barrel

screws

9 - spring

washers

9 - flat

washers

8 - large

bolts

1 A) Fit top crossbar onto bottom crossbar as

shown. Secure crossbars with 1 small bolt, 1 spring

washer, and 1 flat washer using an allen wrench.

B) Remove small screws from each barrel nut and set

aside. Insert 4 barrel nuts into crossbar assembly as

shown. With a flat head screwdriver, align hole on

each barrel nut with nearest hole on edge of crossbar

assembly.

1 - top crossbar

1 - bottom crossbar

4 - legs

1 - tabletop

Align hole on each

barrel nut with nearest

hole on edge of

crossbar

1 - short

bolt

phillips head screwdriver

flat head screwdriver

allen wrench (included)

Customer Service 800.967.6696 | www.crateandbarrel.com

A

B

Summary of content (2 pages)

PAGE 1
LYRIC ROUND DINING TABLE HARDWARE 4 - barrel nuts 4 - barrel screws 9 - flat washers 8 - large bolts 9 - spring washers 1 - short bolt Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Lyric Round Dining Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
LYRIC ROUND DINING TABLE 2 Insert 1 barrel screw into each leg as shown. Secure screws with a phillips head screwdriver. 3 With the assistance of another adult, carefully place tabletop upside side down onto a clean, padded surface. Insert 4 legs into tabletop as shown. Very loosely attach each leg with 2 bolts, 2 spring washers, and 2 flat washers. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.