Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Madison Large Buffet

MADISON LARGE BUFFET

Made in Denmark R03

Page 1 of 6

Thank you for purchasing the Madison Large Buffet.

This page

lists all the contents included in the box.

Please take the time

to identify the hardware as well as

the individual components

to this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

TOOLS REQUIRED

Missing hardware? Please call 800.606.6387 for replacements.

HARDWARE

COMPONENTS

1 - top panel

1 - bottom panel

2 - large

back panels

2 - small

back panels

2 - side

panels

2 - middle

partitions

2 - long aprons

2 - short aprons

1 - panel connector

4 - legs4 - door

panels

4 - door pulls

5 - glides

40 - wood

dowels

12 - shelf

pins

24 - cam

screws

8 - large

screws

8 - case

hinges

8 - door

hinges

16 - cam

covers

24 - cams

28 - small

screws

4 - support

wedges

3 - door

stops

Phillips head screwdriver

1 - large shelf

2 - small shelves

4 - adhesive

pads

Hammer

Customer Service 800.967.6696 | www.crateandbarrel.com

3 - medium

screws

1 - metal

disk

1 - support

leg

Summary of content (6 pages)

PAGE 1
MADISON LARGE BUFFET HARDWARE Thank you for purchasing the Madison Large Buffet. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
MADISON LARGE BUFFET NOTE: Do not over tighten the cam screws B A A C B 1 A. Insert 1 cam screw per leg and tighten with a phillips head screwdriver. B. Insert 2 wood dowels into the ends of each long apron. C. Insert 2 cams into the face of each long apron. Make sure the arrow on each cam points to the closest short end of the the apron. 2 A. Fit 1 leg on the end of each long apron, aligning dowels and cam screws with corresponding holes. B.
PAGE 3
MADISON LARGE BUFFET C B B A B Top Panel A A 5 A) Attach metal disk to leg assembly with 3 medium screws as shown. Secure with Phillips head screwdriver. B) Attach support leg into assembly as shown. Turn leg clockwise to secure. C) Gently tap 1 glide into bottom of the support leg with a hammer. 6 A) Position assembled unit upright. Insert 8 cam screws to the bottom panel as illustrated. Secure with a phillips head screwdriver. B) Attach 8 cam screws and 3 door stops to the underside of top panel.
PAGE 4
MADISON LARGE BUFFET B Small Back Panel Large Back Panel Large Back Panel Small Back Panel A A 9 A) Slide 2 large and 2 small back panels into grooves at rear of side panels and middle partitions as shown. B) Slide panel connector between 2 large back panels. 10 Carefully position top panel over assembled unit. Align cam screws and wood dowels with corresponding holes in the top, middle and side panels. Make sure the door stops face the front of the assembled unit.
PAGE 5
MADISON LARGE BUFFET B A B A 13 A) Attach 4 door panels to assembled unit. Fit each door hinge into corresponding case hinge and secure by tightening preinstalled screws in case hinge with a screwdriver. Hinges are adjustable to help align the doors. Refer to page 6 for adjustment instructions. B) Insert shelf pins into side panels and middle partitions at desired shelf height (adjustable). 14 A) Fit 1 large shelf and 2 small shelves into case and onto shelf pins.
PAGE 6
MADISON LARGE BUFFET HINGE ADJUSTMENT If the doors do not appear square or aligned, loosen or tighten the appropriate screws on each case hinge as illustrated. A B 1 1) Side to side adjustment: Loosen screw A, adjust gap with screw B and re-tighten screw A. A B 2 2) Depth adjustment: Loosen screw A, push hinge arm forwards or backwards, re-tighten screw A and secure screw B with a 1/4 turn clockwise.