Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Madison Large Hutch

ASSEMBLY HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Denmark - r03 Page 1 of 6

Thank you for purchasing the Madison Large Hutch.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

MADISON LARGE HUTCH

Missing hardware?

Please call 800.606.6387

for replacements.

34 - wood

dowels

1 - top

panel

8 - cam

screws

8 - cams

16 - connecting

bolts

12 - small

screws

8 - large

screws

2 - pulls

16 - shelf

pins

4 - bumpers

4 - hinges

4 - mending

plates

4 - hinge

plates

1 - bottom

panel

1 - bottom

back panel

2 - small adjustable

shelves

2 - small back

panels

2 - door fronts

3 - partitions

2 - side panels

(1 left, 1 right)

8 - cam

covers

1 - felt

2 - large adjustable

shelves

2 - large back

panels

WALL MOUNTING HARDWARE

1 - wall

anchor strap

1 - cabinet

screw

2 - flat

washers

phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

allen wrench

Summary of content (6 pages)

PAGE 1
MADISON LARGE HUTCH ASSEMBLY HARDWARE 34 - wood dowels 12 - small screws Thank you for purchasing the Madison Large Hutch. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
MADISON LARGE HUTCH NOTE: Make sure arrows on each cam point towards nearest edge with holes A bottom back panel A B left and right side panels B bottom panel 1 A) Insert 4 cam screws and 3 wood dowels into left and right side panels as shown. Secure cam screws with a phillips head screwdriver. B) Position each hinge plate over corresponding holes in side panels. Secure hinges with pre-attached bolts, using a screwdriver. 2 A) Insert 4 cams and 4 wood dowels into bottom back panel as shown.
PAGE 3
MADISON LARGE HUTCH B partition BACK VIEW OF ASSEMBLED UNIT A felt 5 A) Adhere felt along bottom edge of assembled unit as shown. B) Fit dowels of partitions into corresponding holes of assembled unit as shown. 6 Secure bottom panel to assembled unit with 6 connecting bolts as shown, using an allen wrench.
PAGE 4
MADISON LARGE HUTCH small adjustable shelf large adjustable shelf large adjustable shelf A A B small adjustable shelf 9 Secure top panel to assembled unit with 10 connecting bolts as shown. 10 A) Insert 16 shelf pins at desired shelf heights as shown. B) Place 2 small adjustable shelves and 2 large adjustable shelves into assembled unit. Make sure each shelf is securely supported by shelf pins.
PAGE 5
MADISON LARGE HUTCH 13 With the assistance of another adult, carefully place hutch on top of buffet as shown. Attach 4 connecting brackets to back of hutch/buffet assembly with 2 large screws per bracket as shown. Secure screws with a screwdriver. Assembly is now complete. hutch buffet (sold separately) HINGE ADJUSTMENT If the doors do not appear square or aligned, loosen or tighten the appropriate screws on each case hinge as illustrated.
PAGE 6
MADISON LARGE HUTCH SIDE VIEW cabinet screw flat washer wall wall strap flat washer wall anchor appropriate to wall type wall screw appropriate to wall type NOTE: Insert screws 3/4"-1" from the edge of the strap WALL MOUNTING ASSEMBLY For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors made for your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.