Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Madison Wine Tower

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China r02 Page 1 of 3

1 Slide notches on horizontal and vertical shelf panels

together to create the wine bottle dividers as shown. When

assembling shelf panels, make sure that the sticker labeled,

“BOTTOM,” faces the same direction.

Thank you for purchasing the Madison Wine Tower.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

MADISON WINE TOWER

Missing hardware? Please call

800.606.6387 for replacements.

12 - bolts

12 - spring

washers

12 - flat

washers

2 - drawer

stops

NOTE: Make sure that the sticker

labeled, “BOTTOM,” on horizontal

shelf panels face the same direction.

vertical

shelf panels

horizontal

shelf panels

1 - drawer

pull

2 - pull

screws

5 - horizontal shelf

panels

Allen wrench (included)

Customer Service 800.967.6696 | www.crateandbarrel.com

2 - vertical shelf

panels

1 - back panel

2 - side panels

(1 - left, 1- right)

3 - shelves

(1 - top, 1 - middle, 1 - bottom)

1 - top panel

1 - drawer

Summary of content (3 pages)

PAGE 1
MADISON WINE TOWER HARDWARE Thank you for purchasing the Madison Wine Tower. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. 12 - bolts 12 - spring washers 12 - flat washers 1 - drawer pull 2 - pull screws 2 - drawer stops Missing hardware? Please call 800.606.6387 for replacements.
PAGE 2
MADISON WINE TOWER top shelf B Make sure drawer glide on middle panel runs perpendicular to side panel. A bottom shelf A NOTE: Do not over tighten the bolts. 2 A) Place left side panel onto padded surface. Attach middle and bottom shelves onto side panels with 2 bolts, 2 spring washers, and 2 bolts per shelf. Secure with an Allen wrench, but do not over tighten. Make sure drawer glide on middle panel runs perpendicular to side panel as shown. B) Slide top shelf into grooves on left side panel as shown.
PAGE 3
MADISON WINE TOWER B A A B 6 With the assistance of another adult, position unit upright. Attach top panel onto unit as shown with 4 bolts, 4 spring washers, and 4 flat washers as shown. Secure with an Allen wrench. 7 A) Loosely insert 2 drawer stops into drawer as shown. B) Attach drawer pull onto drawer with 2 pull screws. Secure with Phillips head screwdriver but do not over tighten. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.