Assembly Instruction

MATRIX REVOLVING FLOOR MIRROR

1 - stand

TOOLS REQUIRED

phillips head screwdriver

Made in Taiwan - r03 Page 1 of 1

Thank you for purchasing the Matrix Revolving Floor

Mirror. This page

lists all the contents included in the box.

Please take the time

to identify the hardware as well as the

individual components

to this product. As you unpack and

prepare for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

Missing hardware?

Please call 800.606.6387 for replacements.

HARDWARE

COMPONENTS

2 - screws

1 - back

1 - revolving

Customer Service 800.967.6696 | www.crateandbarrel.com

1 A) Insert 2 screws into stand using an allen wrench.

Secure screws through stand and into holes of revolving

pin as shown.

B) Insert revolving pin of stand into corresponding hole of

mirror as shown.

1 - mirror

2 Insert 1 back pin into back of assembled unit as

shown.

Assembly is now complete.

mirror

TOOLS REQUIRED

allen wrench (included)

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth.

Do not use abrasive cleaners.

revolving

screws

stand