Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel McAllister Tower

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r01 Page 1 of 3

Thank you for purchasing the McAllister Door/Drawer

Base. This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack and

prepare for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

McALLISTER DOOR/DRAWER BASE

Missing hardware? Please call 800.606.6387 for replacements.

4 - plate

screws

1 - adjustable shelf

1 - base assembly

2 - connecting

plates

4 - shelf

pins

4 - stickers

1 A) Insert 4 shelf pins into holes at the desired shelf

height.

B) Place adjustable shelf into base assembly. Make

sure shelf is securely supported by shelf pins.

adjustable

shelf

NOTE: Make sure shelf

is securely supported

by shelf pins

4 - hinge

bolts

(pre-attached to

hutch assembly)

Customer Service 800.967.6696 | www.crateandbarrel.com

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

Summary of content (7 pages)

PAGE 1
McALLISTER DOOR/DRAWER BASE HARDWARE 4 - shelf pins 4 - plate screws 4 - hinge bolts 4 - stickers (pre-attached to hutch assembly) 2 - connecting plates Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the McAllister Door/Drawer Base. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
McALLISTER DOOR/DRAWER BASE 2 A) Detach door with screwdriver, turning each hinge screw counterclockwise to unfasten. Set screws aside. B) Rotate door and reattach with 4 hinge screws as shown. Do not over tighten the screws. C) Cover exposed holes on left side with 4 stickers as shown. Assembly is now complete.
PAGE 3
McALLISTER DOOR/DRAWER BASE A MULTIPLE UNIT ASSEMBLY bracket 4 A) For every base and base combination, it is suggested that the 2 units be secured together with 2 connecting plates as shown. Secure each plate with 2 plate screws, using a phillips head screwdriver.
PAGE 4
McALLISTER DOOR HUTCH ASSEMBLY HARDWARE 8 - shelf 4 - stickers 6 - plate 3 - connecting pins screws plates 4 - hinge bolts (pre-attached to hutch assembly) WALL MOUNTING HARDWARE 4 - small screws Thank you for purchasing the McAllister Door Hutch. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 5
McALLISTER DOOR HUTCH OPTIONAL RIGHT DOOR ASSEMBLY 2 A) Detach door with screwdriver, turning each hinge screw counterclockwise to unfasten. Set screws aside. B) Rotate door and reattach with 4 hinge screws as shown. Do not overtighten the screws. C. Cover exposed holes on left side with 4 stickers as shown. Assembly is now complete. C sticker C C A door opening to left B B door opening to right CLEANING & CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
PAGE 6
McALLISTER DOOR HUTCH WALL MOUNTING ASSEMBLY C plastic anchor F wall strap wall bracket wall bracket large D screw A small screw 5 Safety Mounting Instructions NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your local hardware store. Made in China - r01 For added safety and stability, it is recommended that the wall mounting hardware be installed.
PAGE 7
McALLISTER DOOR HUTCH UNIT CONFIGURATIONS DB WB SH DH door/drawer base wine base stem holder hutch door hutch 3 Any base and hutch can be configured to create different buffet/hutch or wine tower combinations.