Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Indonesia - r02 Page 1 of 2

1 Place right leg frame onto a clean, padded surface.

Fit top slat, 7 front slats, back slat and front slat into

corresponding holes of right leg frame as shown.

Thank you for purchasing the Mendocino Side Chair.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

MENDOCINO SIDE CHAIR

6 - bolts 2 - screws

7 - slats

1 - seat

2 - leg frames

(1 left, 1 right)

front

slat

right leg

frame

6 - caps

1 - front slat1 - back slat1 - top slat

top

slat

back

slat

Missing hardware? Please call

800.606.6387 for replacements.

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

allen wrench

(included)

phillips head screwdriver

(not included)

(We recommend the use of hand tools instead of power tools)

B-H

PAGE 1
MENDOCINO SIDE CHAIR HARDWARE 6 - bolts 2 - screws 6 - caps Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the Mendocino Side Chair. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
MENDOCINO SIDE CHAIR left leg frame NOTE: Do not over tighten the bolts 2 Fit slats of assembled unit into corresponding holes of left leg frame. 3 Place assembled unit upright. Secure left and right leg frames to slats with 3 bolts per side as shown, using an allen wrench. Do not over tighten the bolts. NOTE: Do not over tighten the screws A seat B cap B 4 A) Fit seat into assembled unit as shown.