Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

WALL MOUNTING HARDWARE

Made in Indonesia - r03 Page 1 of 3

Thank you for purchasing the Mendocino Workbar.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

MENDOCINO WORKBAR

6 - washers 6 - nuts 6 - screws

2- legs

1 - back frame

3 - large

shelves

4 - small

bolts

10 - large

bolts

2 - small

shelves

Missing hardware? Please call

800.606.6387 for replacements.

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

hex wrench

(included)

allen wrench key

(included)

phillips head screwdriver

(not included)

(We recommend the use of hand tools instead of power tools)

1 - small

screw

1 - large

screw

1- wall

strap

1 - plastic

anchor

2 - wall

fittings

PAGE 1
MENDOCINO WORKBAR HARDWARE 6 - washers Missing hardware? Please call 800.606.6387 for replacements. 6 - nuts 6 - screws 4 - small bolts 10 - large bolts WALL MOUNTING HARDWARE 1 - small screw 1 - large screw 1- wall strap 1 - plastic anchor 2 - wall fittings TOOLS REQUIRED Thank you for purchasing the Mendocino Workbar. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
MENDOCINO WORKBAR ASSEMBLY A A B screw C large bolt large bolt threaded bolt small shelf washer nut large shelf large shelf B small shelf large shelf leg small bolt C B A B leg A back frame 1 A) With the assistance of another adult, place back frame onto a clean, padded surface. Loosely attach 3 large shelves to back frame with 6 large bolts and 6 screws as shown. Do not tighten bolts or screws.
PAGE 3
MENDONCINO WORKBAR WALL MOUNTING ASSEMBLY For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible. A) Attach 1 wall fitting to assembled unit as shown, using 1 small screw. B) Determine the final location of unit. Mark position on the wall, approximately 2" below the bracket mounted to the back of the unit.