Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel Meridian 34" Café Table

ASSEMBLY

COMPONENTS

1 - tabletop

Made in Vietnam - r03 Page 1 of 2

Thank you for purchasing the Meridian Café Table.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

MERIDIAN CAFÉ TABLE

1 - hex wrench

(included)

HARDWARE

TOOLS REQUIRED

8 -acorn

nuts

28 - flat

washers

Missing hardware?

Please call 800. 606. 6387 for replacements.

1 - center

connector

4 - legs

1 - allen wrench

(included)

1 - center

hole cap

1 With the assistance of another adult, place

tabletop upside down on a clean, padded

surface. Loosely attach each leg with 2 large

bolts, 4 flat washers and 2 acorn nuts as shown.

Do not fully tighten the bolts until further

instructions.

8 - large

bolts

12 - small

bolts

flat washer

acorn nut

flat

washer

large bolt

leg

NOTE: Do not fully

tighten the bolts

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (2 pages)

PAGE 1
MERIDIAN CAFÉ TABLE HARDWARE 28 - flat washers 8 -acorn nuts 12 - small bolts 8 - large bolts Missing hardware? Please call 800. 606. 6387 for replacements. COMPONENTS 4 - legs Thank you for purchasing the Meridian Café Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
MERIDIAN CAFÉ TABLE flat washer center connector small bolt 2 Align holes in center connector with corresponding holes in legs. Loosely attach center connector to each leg with 3 small bolts and 3 flat washers as shown. At this point, fully tighten large/small bolts with an allen wrench and acorn nuts with a hex wrench. Do not over tighten the bolts. center hole cap 3 With the assistance of another adult, place the table upright.