Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Meridian 5-Pc. Round Dining Ensemble

ASSEMBLY

COMPONENTS

1 - tabletop

Made in Vietnam - r01 Page 1 of 2

Thank you for purchasing the Meridian 48” Round

Dining Table. This page lists all the contents included

in the box. Please take time to identify the hardware as

well as the individual components of this product. As

you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect them

from damage.

Note: 2 people are required to safely assemble this product.

MERIDIAN 48” ROUND DINING TABLE

1 - hex wrench

(included)

HARDWARE

TOOLS REQUIRED

8 -acorn

nuts

28 - washers

Missing hardware?

Please call 800. 606. 6387 for replacements.

1 - center

connector

4 - legs

1 - allen wrench

(included)

1 - center

hole cap

1 With the assistance of another adult, place tabletop

upside down on a clean, padded surface. Loosely

attach each leg by inserting the hardware through each

of the 2 holes and the tabletop frame as shown. Do not

fully tighten the bolts.

washer

nut

washer

large bolt

NOTE: Do not fully

tighten the bolts

until directed

8 - long

bolts

12 - short

bolts

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (2 pages)

PAGE 1
MERIDIAN 48” ROUND DINING TABLE HARDWARE 28 - washers 8 -acorn nuts 12 - short bolts 8 - long bolts Missing hardware? Please call 800. 606. 6387 for replacements. COMPONENTS 4 - legs Thank you for purchasing the Meridian 48” Round Dining Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
MERIDIAN 48” ROUND DINING TABLE center connecter 2 Align holes in center connector with holes in legs. Loosely attach center connector to each leg as illustrated. At this point, fully tighten all the bolts installed in steps 1-2 with the allen wrench and hex wrench provided. center hole cap 3 With the assistance of another adult, place the table upright. If not using an umbrella, conceal hole in the tabletop with the center hole cap. Assembly is now complete.