Assembly Instruction

MOSAIC SIDE TABLE

HARDWARE

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Made in Vietnam - r06 Page 1 of 1

Thank you for purchasing the Mosaic Side Table.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

1 - tabletop

TOOLS REQUIRED

allen wrench (included)

4 - bolts

COMPONENTS

1 - top

leg frame

ASSEMBLY

A) Fit slot of bottom leg frame into slot of top leg

frame as shown.

B) Place the tabletop upside down onto a clean,

padded surface. Position holes in legs over

corresponding holes in tabletop. Loosely attach each

leg to tabletop with 1 bolt and 1 washer as shown. At

this point, fully secure all bolts with an allen wrench.

Do not over tighten the bolts.

Assembly is now complete

NOTE: Do not over tighten the bolts

1 - bottom

leg frame

Missing hardware? Please call

800.606.6387 for replacements.

CLEANING AND CARE

Use mild soap and water to clean the tabletop & base. Do

not use abrasive cleaners or materials. Immediately remove

liquid spills with an absorbent cloth to prevent staining. For

stain protection of the table top, use a sealer designed for

clay products. It is recommended to use coasters to protect

surface from heat and water. Cover the unit if left outdoors for

the winter. This is not a stool; please do not sit on table.

4 - washers

top leg

frame

bottom

leg frame

tabletop