Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r01 Page 1 of 2

1 A) On a clean, padded surface, fit 4 legs into corresponding

notches of 2 connector rings as shown. Insert 4 barrel nuts into each

connector ring as shown. Using a flathead screwdriver, align holes

of each barrel nut with holes in connector rings.

B) Secure legs to connector rings with 8 bolts as shown. Using an

allen wrench, make sure each bolt engages each barrel nut. Loosely

secure bolts.

Thank you for purchasing the Motel Table. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and

prepare for assembly, place the contents on a carpeted

or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

MOTEL TABLE

8 - barrel

nuts

8 - bolts

4 - legs

1 - tabletop

leg

2 - connector

rings

connector

ring

NOTE: Make sure bottom

of each connector ring

faces up as shown

Missing hardware? Please call

800.606.6387 for replacements.

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

allen wrench

(included)

flathead

screwdriver

(We recommend the use of hand tools instead of power tools)

PAGE 1
MOTEL TABLE HARDWARE 8 - barrel nuts 8 - bolts Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the Motel Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
MOTEL TABLE NOTE: Do not over tighten the bolts 2 With the assistance of another adult, place tabletop onto a clean, padded surface. Fit end of each leg into lip of tabletop as shown. Make sure each leg is secure. At this point, using an allen wrench, fully tighten all bolts. Do not over tighten the bolts. Position assembled unit upright. Assembly is now complete. tabletop CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.