Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
HARDWARE
Thank you for purchasing the Onyx 17" Square
Mirror. This page lists all the contents included in the
box. Please take time to identify the hardware as
well as the individual components of this product. As
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect
them from damage.
Note: 2 people are required to safely hang this mirror.
TOOLS REQUIRED
Phillips head screwdriver Allen Wrench (included)
1A
1B
1C
ONYX 17" SQUARE MIRROR
Made in China - r02 Page 1 of 1
1 A. Determine wall location and drill a pilot
hole approximately 1/8"diameter. Insert a
drywall anchor into the hole and secure with
a phillips head screwdriver. Fully tighten
until the anchor is seated flush with the
surface of the wall. NOTE: If mounting
directly into a wall stud, do not use the wall
anchor but fasten screw directly into the wall
stud.
B. Insert the screw with a screwdriver into
the anchor and leave 3/16" protruding out
from the surface of the wall.
C. With the assistance of another adult, hang
the mirror by the cable attached to the back
of the frame.
OPTIONAL DIAGONAL HANGING
Follow Steps 1A and 1B outlined above.
On mirror back, remove bolts and washers
with the allen wrench. Re-attach cable
assembly to the alternate holes on the back
of the mirror frame as shown and hang mirror.
Installation is now complete.
Missing hardware? Please call 800.606.6387 for
replacements.
1 - drywall anchor 1 - screw
CLEANING AND CARE
WALL MOUNTING INSTRUCTIONS:
The wall mounting hardware included with this mirror is intended for drywall installation only. Be sure to use hardware
appropriate for your wall type. Whenever possible, attach mounting hardware into a wall stud.
If you are unsure about your wall type or what mounting method you should use, consult a qualified professional or your
local hardware store.
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.