Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

1 A. Place table top upside down on a padded surface.

Attach leg with 4 wood screws. Secure each screw with a

phillips head screwdriver, but do not over tighten.

B. Insert tube cap in bottom of leg. If necessary, gently tap

into place with a hammer.

Thank you for purchasing the Parallel Corner Unit. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or padded

area to protect them from damage.

Note: 2 people are required to safely assemble this

product.

COMPONENTS

1 - leg

1 - table top

4 - brackets

TOOLS REQUIRED

Phillips head screwdriver

Hammer

PARALLEL CONNECTING CORNER

Page 1 of 2

Made in China - r03

Missing hardware? Please call 800.606.6387 for

replacements.

20 - wood screws

1 - tube cap

PAGE 1
PARALLEL CONNECTING CORNER HARDWARE 20 - wood screws 1 - tube cap Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Parallel Corner Unit. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
PARALLEL CONNECTING CORNER x2 B A 2 Place 4 brackets into position, aligning holes with predrilled holes in tabletop. Secure with 2 wood screws per bracket. 3 A. With the assistance of another adult, position corner assembly as shown. Slide exposed brackets into space between the frame and tabletop of the desk. B. Attach the corner unit by fastening the brackets to the underside of the desktop with 2 wood screws per bracket. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth.