Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
HARDWARE
COMPONENTS
1 A. With the assistance of another adult, place top
panel upside down. Position frame as shown,
aligning corresponding holes in tabs and top. Insert
1 screw and 1 washer through each tab and into
top. Secure each screw with a phillips head
screwdriver.
B. Align holes in shelf panel with tabs and secure
with 4 screws and 4 washers.
Assembly is now complete.
Thank you for purchasing the Parallel Hutch. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are required to safely assemble this
product.
TOOLS REQUIRED
Phillips head screwdriver
PARALLEL HUTCH
Page 1 of 1
Made in China - r03
Missing
hardware?
Please call
800.606.6387 for
replacements.
12 - screws
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the wood is finished
with a protective clear lacquer.
12 - washers
1 - frame
1 - shelf
panel
1 - top
panel
A
B