Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Paterson Desk

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r06 Page 1 of 4

Thank you for purchasing the Paterson Desk. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

PATERSON DESK

Missing hardware?

Please call 800.606.6387 for replacements.

4 - cam

screws

12 - spring

washers

12 - flat

washers

phillips head screwdriver

allen wrench (included)

(We recommend the use of hand tools instead of power tools)

2 - side frames

(1 left, 1 right)

1 - desktop

assembly

(drawer assembly

pre-installed)

1 - crossbar

2 - wood

dowels

4 - barrel nuts

1 Fully extend drawer assembly from desktop assembly.

Locate plastic tabs on left and right drawer glides. With even

pressure, simultaneously lift the left tab (A) and press the right

tab (B) to release drawer assembly from assembled unit. Set

drawer aside.

4 - large

bolts

8 - small

bolts

pre-installed

set screws

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

left drawer

glide

right drawer

glide

drawer

assembly

desktop

assembly

Summary of content (4 pages)

PAGE 1
PATERSON DESK HARDWARE 2 - wood dowels 4 - cam screws 8 - small bolts 4 - large bolts pre-installed set screws 12 - spring washers 12 - flat washers 4 - barrel nuts Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Paterson Desk. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
PATERSON DESK 2 A) Insert 2 cam screws into left and right side frames as shown. Secure, but do not over tighten, cam screws with a phillips head screwdriver. B) Insert 2 wood dowels into crossbar as shown. NOTE: Do not over tighten the cam screws B left and right side frames A barrel nut set screw A Align hole of barrel nut with hole on end of crossbar crossbar D B crossbar 3 A) Using a screwdriver, remove set screws from barrel nuts. B) Insert 1 barrel nut into the crossbar as shown.
PAGE 3
PATERSON DESK 4 A) With the assistance of another adult, place desk assembly face down onto a clean, padded surface. Using a screwdriver, remove set screws from barrel nuts. Insert 1 barrel nut into desk assembly as shown. Fit cam screw of right side frame into barrel nut of desk assembly. Insert 1 set screw into barrel nut and secure. B) Secure right side frame to desk assembly with 4 small bolts, 4 spring washers and 4 flat washers. Secure, but do not over tighten, the bolts using an allen wrench.
PAGE 4
PATERSON DESK 6 With the assistance of another adult, position unit upright. Fully extend drawer glides from desktop. Fit drawer glides of drawer assembly into corresponding drawer glides of desktop. Push drawer assembly forward and listen for a click to ensure that assembly is secure. Assembly is now complete. CLEANING & CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the unit is finished with a protective clear lacquer.