Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Pilsen Desk

HARDWARE

TOOLS REQUIRED

ASSEMBLY

COMPONENTS

Made in China - r03 Page 1 of 2

Thank you for purchasing the Pilsen 36” Desk. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

PILSEN 36” DESK

Missing hardware? Please call 800.606.6387 for replacements.

2 - top

crossbars

1 - glasstop

12 - bolts

1 A) Fit 2 top crossbars over bracket of left

side frame with 2 bolts per crossbar as shown.

Secure, but do not over tighten, bolts using an

allen wrench.

B) Fit bottom crossbar over bracket of rleftt side

frame with 2 bolts as shown.

Repeat steps A and B for right side frame.

right side

frame

NOTE: Do not over

tighten the bolts

6 - bumpers

1 - bottom

crossbar

2 - side frames

(1 left, 1 right)

left side

frame

bottom

crossbar

top

crossbar

top

crossbar

NOTE: Make sure feet

of side frames and bottom

crossbar face up as shown

during assembly

allen wrench (included)

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (2 pages)

PAGE 1
PILSEN 36” DESK HARDWARE 6 - bumpers 12 - bolts Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED allen wrench (included) COMPONENTS 1 - glasstop Thank you for purchasing the Pilsen 36” Desk. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
PILSEN 36” DESK B glasstop 2 A) With the assistance of another adult, position desk assembly upright. Adhere 6 bumpers to desk assembly as shown. B) With the asistance of another adult, carefully place glasstop onto desk assembly as shown. Make sure glasstop is securely supported by bumpers. Assembly is now complete. A bumper CLEANING & CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.