Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Pivot Buffet

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Vietnam - r05 Page 1 of 5

Thank you for purchasing the Pivot Buffet. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and

prepare for assembly, place the contents on a carpeted

or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

PIVOT BUFFET

Missing hardware?

Please call 800.606.6387 for replacements.

1 - top

panel

1 - bottom

panel

1 - front

frame

4 - adjustable

shelves

2 - fixed

shelves

2 - wine rack

panels

1 - back

panel

2 - middle

partitions

(1 left, 1 right)

2 - side panels

(1 left, 1 right)

1 - drawer

bottom

2 - drawer

sides

phillips head screwdriver

Customer Service 800.967.6696 | www.crateandbarrel.com

8 - cams 8 - cam

screws

44 - bolts 44 - flat

washers

44 - spring

washers

8 - screws

1 - drawer

back

1 - drawer

front

1 - drawer

pull

2 - door

pulls

4 - feet

16 - shelf

pins

Summary of content (5 pages)

PAGE 1
PIVOT BUFFET HARDWARE Thank you for purchasing the Pivot Buffet. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. 8 - cams 8 - cam screws 44 - bolts 44 - spring washers 8 - screws 16 - shelf pins 44 - flat washers Missing hardware? Please call 800.606.6387 for replacements.
PAGE 2
PIVOT BUFFET NOTE: Make sure “BOTTOM” labeled on each fixed shelf is facing towards the bottom A fixed shelf NOTE: Make sure arrows on each cam point towards nearest edge with holes left partition fixed shelf BOTT OM BOTT OM B partition NOTE: Make sure arrows labeled “UP” on left/right partition are pointing towards the top of assembly 1 A) Insert 4 cams into 2 fixed shelves as shown. Make sure arrows on each cam point towards nearest edge with holes.
PAGE 3
PIVOT BUFFET front frame front frame frame support 5 Remove frame support from front frame as shown. With a screwdriver, turn pre-attached screws counter-clockwise to detach and discard. foot 6 With the assistance of another adult, attach front frame to assembled unit with 6 bolt, 6 spring washers, and 6 flat washers as shown.
PAGE 4
PIVOT BUFFET top panel drawer back left drawer side right drawer side 9 Attach top panel to assembled unit with 15 bolts, 15 spring washers, and 15 flat washers as shown. drawer bottom 11 Slide drawer bottom into grooves of drawer assmebly as shown. Made in Vietnam - r05 10 Attach left and right drawer sides to drawer back with 4 screws as shown. Secure screws with a screwdriver. drawer front 12 Fit drawer front to drawer assembly and secure with 4 screws as shown. Customer Service 800.967.
PAGE 5
PIVOT BUFFET wine rack panel wine rack panel 14 Fit drawer glides of drawer assembly into corresponding drawer glides of assembled unit as shown. 15 Fit slot of wine rack panel into corresponding slot of remaining wine rack panel as shown. 16 A) Insert 16 shelf pins at desired shelf heights as shown. B) Insert 4 adjustable shelves into assembled unit. Make sure each shelf is securely supported by shelf pins. C) Insert wine rack assembly into assembled unit as shown. Assembly is now complete.