Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Puzzle Desk Black

HARDWARE

Thank you for purchasing the Puzzle

Desk. This page lists all the contents

included in the box. Please take time to

identify the hardware as well as the

individual components of this product. As

you unpack and prepare for assembly,

place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely

assemble this product.

COMPONENTS

TOOLS REQUIRED

Phillips head screwdriver

Large Allen Wrench (included)

1 - desk

back panel

1 - desk bottom

panel

1 - desk short

side panel

1 - desk top

panel

1 - desk

side panel

PUZZLE DESK - DESK COMPONENT

Page 1 of 3

Missing hardware? Please call 800.606.6387

for replacements.

16 - cams

16 - cam

screws

17 - cam

covers

1 - large

screw

12 - wood

dowels

The Puzzle Desk consists of 2 separate

components, the File and the Desk. The

following instructions are for assembly of the

Desk Component.

DESK COMPONENT ASSEMBLY

Made in China - r12

Customer Service 800.967.6696 | www.crateandbarrel.com

Summary of content (9 pages)

PAGE 1
PUZZLE DESK - DESK COMPONENT HARDWARE 16 - cams 1 - large screw Thank you for purchasing the Puzzle Desk. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
PUZZLE DESK - DESK COMPONENT A Desk Side Panel B Desk Short Side Panel A Desk Back Panel B Desk Bottom Panel Make sure arrow on each cam points towards edge D C C Desk Short Side Panel Desk Side Panel Desk Top Panel 1 A. Insert 6 cam screws and 4 wood dowels in the desk side panel. Secure, but do not over tighten cam screws with a phillips head screwdriver. B. Insert 3 cam screws in the desk short side panel and secure with a screwdriver. C.
PAGE 3
PUZZLE DESK - DESK COMPONENT B A A B 5 A. Fit cam screws of desk side panel into corresponding holes in desk back panel. Secure all 3 cams with a screwdriver. B. Fasten top of desk back panel to bottom shelf with 1 large screw. Fully tighten with the large allen wrench. 6 A. Fit cam screws of desk top panel into corresponding holes in side panels. Secure all 6 cams with a screwdriver. C. Conceal all exposed cams with cam covers. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth.
PAGE 4
PUZZLE DESK - FILE COMPONENT HARDWARE 35 - cams 2 - drawer pulls 2 - large wood screws Thank you for purchasing the Puzzle Desk. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 5
PUZZLE DESK - FILE COMPONENT FILE COMPONENT ASSEMBLY The Puzzle Desk consists of 2 separate components, the File and the Desk. The following instructions are for assembly of the File Component. A C D E F 1 A. Insert 3 cam screws, 3 cams and 2 wood dowels into file right side panel as shown. B. Insert 9 cam screws, 3 cams and 2 wood dowels into file left side panel. C. Insert 4 cam screws, 6 cams and 4 wood dowels into file top panel. D. Insert 10 cam screws into the file bottom panel. E.
PAGE 6
PUZZLE DESK - FILE COMPONENT A B 4 A. Insert 6 wood dowels and 5 cams into the file back panel as shown. Make sure arrows on each cam point towards nearest edge with holes. B. Turn file back panel over and fit into corresponding holes in file top panel as shown. Secure cam by turning clockwise with a phillips head screwdriver. 5 Fit cam screws of file left side panel into corresponding holes in the assembly. Lock all 9 cams by turning clockwise with a phillips head screwdriver.
PAGE 7
PUZZLE DESK - FILE COMPONENT Aprox 3/4” 8 Fit file bottom panel onto the underside of the assembly as shown, aligning the dowels and cam screws with corresponding holes. Secure 10 cams with a phillips head screwdriver. 9 Attach 1 drawer glide to the file left side panel and 1 drawer glide to the file interior panel with 2 small wood screws per glide. Make sure the final installed position of the glide is approximately 3/4” from the front edge of each panel as illustrated. A A B B 10 A.
PAGE 8
PUZZLE DESK - FILE COMPONENT A A B B 12 A. Attach right and left large drawer sides to large drawer back with 4 bolts as shown. B. Slide large drawer bottom into slot at bottom of back and side panels. 13 A. Fit large inner drawer front onto assembly as shown. Attach with 4 bolts and secure with the small allen wrench. B. Align holes large drawer front with holes on assembly. Insert 2 machine screws through drawer fronts and into 1 drawer pull. Secure with a phillips head screwdriver.
PAGE 9
PUZZLE DESK - FILE COMPONENT 16 With the assistance of another adult, place desk component onto file component as shown. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. Made in China - r14 Customer Service 800.967.6696 | www.crateandbarrel.