Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

1 A. Place center tabletop on a clean, padded surface.

Align 2 drop leaf panels with center top and position 4

hinges over the pre-drilled holes. NOTE: The small side of

the hinge must be attached to the center top.

B. Attach hinges with 6 oval head screws per hinge and

secure with a phillips head screwdriver.

Thank you for purchasing the Quantum Drop Leaf Table.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect

them from damage.

Note: 2 people are required to safely assemble this

product.

COMPONENTS

1 - center tabletop

2 - drop leaf

panels

1 - leg assembly A

1 - leg assembly B

TOOLS REQUIRED

Phillips head screwdriver

QUANTUM DROP-LEAF TABLE

Page 1 of 2

Made in Canada - r01

4 - hinges

Missing hardware? Please call 800.606.6387 for

replacements.

16 - wood

screws

24 - oval

head screws

1 - hex nut

1 - bolt

x 4

PAGE 1
QUANTUM DROP-LEAF TABLE HARDWARE 16 - wood screws 1 - hex nut Thank you for purchasing the Quantum Drop Leaf Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
QUANTUM DROP-LEAF TABLE Make sure pin of leg frame A fits into hole of leg frame B x 16 A B 2 A. Slip leg assembly A through leg assembly B as illustrated. Make sure the pin of leg A fits into the hole on leg B. B. Secure the 2 leg assemblies together with 1 bolt and 1 hex nut. Tighten with a phillips head screwdriver. 3 Place leg assembly into position over pre-drilled holes in tabletop. Loosely insert 4 wood screws per leg.