Assembly Instruction

COMPONENTS
1 A) Carefully remove all com-
ponents from box and remove all
plastic coverings. Fit threaded
stud of base into column as
shown. Pull cord through base.
Turn base counter-clockwise to
secure.
B) Fit threaded stud of top cap
into column as shown. Turn top
cap clockwise.
C) Place lamp assembly upright
onto clean, padded surface.
Install bulb into socket as shown.
Made in China - r04 Page 1 of 2
Thank you for purchasing the Rhodes Floor Lamp.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
RHODES FLOOR LAMP
1 - lampshade
1 - harp
1 - base
1 - finial
1 - standard type
“A” bulb
(150 watt max)
NOT INCLUDED
base
column
socket
saddle
harp
2 Gently squeeze harp
ends together and insert into
the saddle as shown.
saddle
harp
1 - standard type
“A” bulb
(150 watt max)
NOT INCLUDED
top
cap
1 - column
1 - top
cap
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com