Assembly Instruction

HARDWARE

TOOLS REQUIRED

Made in China - r03 Page 1 of 2

1 Place base upside down onto a clean, padded surface

as shown. Fit 5 wheels into corresponding holes of base

as shown. Secure, but do not over tigthen, wheels with a

hex wrench.

Thank you for purchasing the Rolling Desk Chair. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

ROLLING DESK CHAIR

Missing hardware?

Please call 800.606.6387 for replacements.

4- bolts4 - flat

washers

4 - spring

washers

allen wrench (included)

1 - seat

mechanism

1 - seat

1 - base 1 - gaslift

COMPONENTS

wheel

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

5 - wheels

base

hex wrench (included)

NOTE: Do not over

tighten the wheels

PAGE 1
ROLLING DESK CHAIR HARDWARE 4 - spring washers 4 - flat washers 4- bolts Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the Rolling Desk Chair. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
ROLLING DESK CHAIR bolt spring washer flat washer gas lift FR ON T seat 2 Attach seat mechanism to seat with 4 bolts, 4 spring washers, and 4 flat washers as shown. Make sure mechanism is positioned as shown. Secure, but do not over tighten, bolts with an allen wrench. 3 Fit bottom of gas lift into hole of base as shown. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.