Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Somerset Kitchen Island

HARDWARE

Thank you for purchasing the Somerset Kitchen Island.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this

product.

COMPONENTS

3 - drawer

fronts

3 - right drawer

side panels

3 - left drawer

side panels

3 - drawer

back panels

TOOLS REQUIRED Flat head screwdriver Phillips head screwdriver

1 - adjustable shelf

3 - drawer

bottom panels

1 - top 1 - back

frame

1 - right side

frame

4 - feet 2 - towel

rack brackets

1 - left side

frame

1 - front

frame

1 - center

panel

1 - bottom

panel

1 - towel bar

Made in China - r10

Missing hardware? Please call 800.606.6387 for replacements.

16 - short

screws

(5/32"dia)

2 - long

screws

10 - wood

dowels

3 - long

pull bolts

2 - short

pull bolts

4 - medium

bolts (1"long)

7 - short

bolts

2 - long

bolts

4 - cams

4 - cam

screws

2 - casters

4 - shelf

pins

2 - casters

with brakes

7 - metal

brackets

5 - pulls

4 - short

screws

(1/8"dia)

24 - medium

screws

12 - medium

bolts (1-1/4"long)

SOMERSET KITCHEN ISLAND

3 - flat head

screws

Customer Service 800.967.6696 | www.crateandbarrel.com

Summary of content (4 pages)

PAGE 1
SOMERSET KITCHEN ISLAND HARDWARE 2 - long screws 4 - cams 10 - wood dowels Thank you for purchasing the Somerset Kitchen Island. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
SOMERSET KITCHEN ISLAND A Arrow on cam points towards nearest edge B Cam in unlocked position Cam in locked position Make sure wheels of drawer glides face up 1 A. Insert 2 cams into the center panel as shown. Make sure the arrow on the cam points towards the closest edge. B. Insert 3 wood dowels and 2 cam screws into the back frame. Fully tighten each cam screw with a phillips head screwdriver. 2 Fit center panel into position over dowels. Make sure the wheels of the drawer glides face up as shown.
PAGE 3
SOMERSET KITCHEN ISLAND A B 5 A. Fit towel bar into holes of 2 towel bar brackets. Insert 2 wood dowels into bottom holes of brackets. B. Fit towel rack assembly onto left side frame and attach with 2 long bolts. Secure with a screwdriver. 6 Attach 2 side frames to the case assembly with 12 medium bolts (1-1/4” long) as shown. Fully tighten all bolts with a screwdriver. B A A or B Casters with brakes along same edge 7 At this point decide if you want to install casters or legs onto the kitchen cart.
PAGE 4
SOMERSET KITCHEN ISLAND Make sure wheel is at back of drawer side B A A B 9 A. With the assistance of another adult, turn case assembly upright. Fit 7 metal brackets into the slots on back, side and center panels. B. Fit top into position, aligning holes on underside with holes in metal brackets. Secure with 1 short bolt per bracket. 10 A. Attach 1 left and 1 right drawer side to the drawer front as shown with 2 medium screws per side. Make sure the wheel on each drawer side is at the back.