Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China R02 Page 1 of 3

1 With assistance of another adult, carefully place

tabletop face down on a padded surface. Using a

Phillips head screwdriver, unscrew pre-assembled

bolts, spring washers, and flat washers from

mounting panel. Set aside mounting panel and

associated hardware.

Thank you for purchasing the Spencer Pedestal

Extension Table. This page lists all the contents

included in the box. Please take time to identify the

hardware as well as the individual components of this

product. As you unpack and prepare for assembly,

place the contents on a carpeted or padded area to

protect them from damage.

Note: 2 people are required to safely assemble this product.

SPENCER PEDESTAL EXTENSION TABLE

Missing hardware? Please call 800.606.6387

for replacements.

4 - legs

hex wrench (included)

Phillips head screwdriver

(included)

Customer Service 800.967.6696 | www.crateandbarrel.com

1 - pedestal

1 - tabletop (extension

pre-assembled)

12 - hex

nuts

12 - spring

washers

12 - flat

washers

8 - bolts

PAGE 1
SPENCER PEDESTAL EXTENSION TABLE HARDWARE 12 - hex nuts 12 - spring washers 12 - flat washers Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Spencer Pedestal Extension Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
SPENCER PEDESTAL EXTENSION TABLE B B A NOTE: Make sure preassembled small square panel on mounting panel is facing downwards. 2 Fit 4 legs into pedestal by aligning pre-assembled bolts with corresponding holes as shown. Secure each leg with 2 hex nuts, 2 spring washers, and 2 flat washers using a hex wrench. 3 A) With the assistance of another adult, position unit upright. Carefully fit mounting panel onto pedestal as shown by aligning pre-assembled bolts with corresponding holes.
PAGE 3
SPENCER PEDESTAL EXTENSION TABLE INSTRUCTIONS TO RELEASE LEAF EXTENSION VIEW FROM UNDERNEATH TABLETOP 90º Turn clockwise to unlock Turn counterclockwise to lock 1 A) Locate 4 locking clasps underneath tabletop assembly. B) To unlatch, turn each handle 90º clockwise. This will release the tabletop sections. 2 With the assitance of another adult, slide the tabletop sections apart. Carefully remove leaf and set aside. Close tabletop sections and relatch 2 locking clasps.