Assembly Instruction

HARDWARE
TOOLS REQUIRED
COMPONENTS
Made in China r04 Page 1 of 2
Thank you for purchasing the Spotlight Desk. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
SPOTLIGHT DESK
Missing hardware? Please call 800.606.6387 for replacements.
4 - long
bolts
12- split
washers
12 - flat
washers
2 - barrel
nuts
2 - screw
posts
2 - set screws
8 - short
bolts
Phillips head screwdriver (included)
Flat head screwdriver
Customer Service 800.967.6696 | www.crateandbarrel.com
1 - tabletop
assembly
1 - crossbar
2 - leg frames
(1 left, 1 right)
1 Lay both leg frames face down on a padded surface as
shown. Insert 1 screw post into each leg and secure with a
flat head screwdriver. Important: Make sure to align slot on
top of screw post parallel to leg. Do not over tighten screw
posts.
IMPORTANT:
Make sure to align
slot of screw post
parallel to leg