Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China R06 Page 1 of 2

1 A) Carefully remove all pre-assembled drawers

from drawer case. Pull drawer out to reveal latch on

each drawer glide as shown.

B) With even pressure, pull up left side latch and push

down right side latch to release drawer glides from

case glides as shown. Set drawer aside. Repeat for

each drawer.

Thank you for purchasing the Spotlight Credenza. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

SPOTLIGHT CREDENZA

Missing hardware? Please call 800.606.6387 for

replacements.

8 - bolts

8 - spring

washers

8- flat

washers

4 - file rails

drawer glide

case glide

latch

right side

left side

NOTE: Be careful

when removing drawers,

glides may be greasy.

2 - side panels

(1 - left, 1- right)

Phillips head screwdriver

(included)

Customer Service 800.967.6696 | www.crateandbarrel.com

1 - drawer case

(with 4 pre-assembled drawers)

PAGE 1
SPOTLIGHT CREDENZA HARDWARE 8 - spring washers 8 - bolts 8- flat washers 4 - file rails Thank you for purchasing the Spotlight Credenza. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Missing hardware? Please call 800.606.6387 for replacements.
PAGE 2
SPOTLIGHT CREDENZA B B A 2 With the assistance of another adult, carefully place drawer case top down onto a padded surface. Attach left and right side panels onto drawer case with 4 spring washers, 4 flat washers, and 4 bolts per panel. Fully tighten bolts with a Phillips head screwdriver. 3 With the assistance of another adult, carefully turn the credenza right side up. A) Insert 4 drawer assemblies back into the case, fitting rail of drawer glide into rail of case glides.