Assembly Instruction

ASSEMBLY
COMPONENTS
1 - tabletop
Made in Taiwan- r02 Page 1 of 1
Thank you for purchasing the Square Kitchen Table.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
SQUARE KITCHEN TABLE
HARDWARE
TOOLS REQUIRED
Missing hardware?
Please call 800.606.6387
for replacements.
1 - top
leg frame
1 - allen wrench
(included)
1 - bottom
lege frame
1 Attach bottom leg frame to top leg frame with 1
large bolt as shown. Loosely attach bolt using an
allen wrench.
1 - large
bolt
16 - small
bolts
bottom
leg frame
top
leg frame
bracket
2 With the assistance of another adult, position tabletop as
shown. Align holes in brackets of leg assembly with
corresponding holes in tabletop. Loosely attach each
bracket with 4 small bolts as shown, using an allen wrench.
At this point, fully tighten large/small bolts with an allen
wrench. Do not over tighten the bolts.
Assembly is now complete.
leg
assembly
tabletop
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
wood is finished with a protective lacquer.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com