Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Three-Part Laundry Sorter

COMPONENTS

Made in China - r06 Page 1 of 3

Thank you for purchasing the 3-Way Laundry Sorter.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

3-WAY LAUNDRY SORTER

2 - top

crossbars

2 - back

crossbars

1 - top panel

2 - outer

side frames

(1 left, 1 right)

ASSEMBLY HARDWARE

TOOLS REQUIRED

Missing hardware? Please call

800.606.6387 for replacements.

10 - small

screws

8 - large

screws

14 - barrel

nuts

phillips head screwdriver

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. Do not use furniture wax or polish as

the wood is finished with a protective clear lacquer.

(We recommended the use of hand tools instead power tools)

4 - wheels

28 - bolts

2 - inner

side frames

(1 left, 1 right)

1 - middle

crossbar

2 - glides

2 - rod

crossbars

6 - rods

3 - laundry

bags

flat head screwdriver

allen wrench

56 - washers

28 - bolt

covers

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (3 pages)

PAGE 1
3-WAY LAUNDRY SORTER ASSEMBLY HARDWARE 10 - small screws 56 - washers Missing hardware? Please call 800.606.6387 for replacements. 28 - bolts 8 - large screws 14 - barrel nuts 28 - bolt covers TOOLS REQUIRED allen wrench flat head screwdriver Thank you for purchasing the 3-Way Laundry Sorter. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
3-WAY LAUNDRY SORTER outer left side frame NOTE: Do not over tighten the screws DETAILED SIDE VIEW NOTE: Make sure holes on each barrel nut are aligned with holes in crossbars top crossbar outer right side frame A top crossbar top panel 1 A) Insert 2 barrel nuts into each top crossbar. Using a flat head screwdriver, align holes of each barrel nut with holes in crossbars. B) Attach 2 top crossbars to outer left and right side frames with 4 bolts and 8 washers per side as shown.
PAGE 3
-WAY LAUNDRY SORTER inner left side frame inner right side frame B A middle crossbar C wheel rod crossbar 5 A) Insert 2 barrel nuts into each rod crossbar. B) Attach 2 rod crossbars to inner left and right side frames with 4 bolts and 8 washers per side as shown. Loosely secure bolts. A 6 A) Position assembled unit as shown. Insert 2 barrel nuts into middle crossbar as shown. B) Attached middle crossbar to inner left and right side frames with 2 bolts and 4 washers per side as shown.