Assembly Instruction

HARDWARE
COMPONENTS
Made in China - r03 Page 1 of 1
Thank you for purchasing the Tiago Coffee Table. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
TIAGO COFFEE TABLE
Missing hardware? Please call 800.606.6387 for replacements.
1 - tabletop
4 - thumbscrews
1 - leg assembly
4 - washers
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
ASSEMBLY
Carefully place tabletop upside down onto a
clean, padded surface. Open hinged leg
assembly and attach to tabletop with 4
thumbscrews and 4 washers as shown.
Partially turn each thumbscrew clockwise. At
this point, fully tighten after all 4 thumbscrews
are inserted. Position unit upright.
Assembly is now complete.
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use
furniture wax or polish as the unit is finished
with a protective clear lacquer.
leg
assembly
tabletop
NOTE: Do not fully
tighten thumbscrews
until all 4 are partially
inserted.