Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Umbrella 10' Cover

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r08 Page 1 of 4

Thank you for purchasing the Ventura Umbrella. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

VENTURA UMBRELLA

Missing hardware?

Please call 800.606.6387 for replacements.

4 - bolts

allen wrench

(included)

1- upright

1 - umbrella

assembly

1 - knob

1 - base

1 With the assistance of another adult, fit upright into

corresponding hole of base as shown. Secure with 4 bolts

using an allen wrench. Do not over tighten the bolts.

ASSEMBLY

base

upright

NOTE: Do not over

tighten the bolts

underside

of base

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

(We recommend the use of hand tools instead of power tools)

Summary of content (4 pages)

PAGE 1
VENTURA UMBRELLA HARDWARE 4 - bolts Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Ventura Umbrella. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
VENTURA UMBRELLA button A NOTE: Make sure umbrella is in the closed position before assembling A closed position curved pole B button B vertical pole umbrella pole knob base assembly 2 Making sure the umbrella is in the closed position, fit pole of umbrella over pole of base assembly as shown. With assistance of another adult, align hole on each pole, and secure poles with the knob. Turn knob clockwise to fasten.
PAGE 3
VENTURA UMBRELLA INSTRUCTIONS TO INSTALL AND REMOVE COVER umbrella frame hook button umbrella frame 1 Release hook from umbrella frame as shown. 2 Press button to release umbrella frame. Carefully pull on umbrella frame to remove and set aside. button A umbrella frame cover (sold separately) hook B umbrella frame cover (sold separately) umbrella frame umbrella stand 3 Fit cover (sold separately) onto umbrella frame as shown.
PAGE 4
VENTURA UMBRELLA INSTRUCTIONS TO OPEN AND ADJUST UMBRELLA STAND cover (sold separately) rib cover pocket NOTE: Before opening the umbrella, make sure to separate the frame of the umbrella first. If the frame is intertwined, it might break when being cranked up. 5 Fit each rib into corresponding pocket of cover. Assembly is now complete. To remove cover, please reverse steps 1-5. CLEANING & CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.