Assembly Instruction

Made in China - r01 Page 1 of 1

VENTURA UMBRELLA

2 Press button to release umbrella

frame. Carefully pull on umbrella frame

to remove and set aside.

button

umbrella

frame

umbrella

frame

cover

(sold

separately)

3 Fit cover (sold separately) onto

umbrella frame as shown.

4 A) Fit cord of umbrella stand through umbrella frame and

secure umbrella frame to stand. Make sure button of

umbrella frame fully engages hole of stand.

B) Re-attach hook to umbrella frame.

hook

umbrella frame

button

umbrella

frame

umbrella

stand

cover

(sold separately)

5 Fit each rib into corresponding pocket of cover.

Assembly is now complete.

To remove cover, please reverse steps 1-5.

cover

(sold separately)

pocket

rib

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

INSTRUCTIONS TO INSTALL

AND REMOVE COVER

1 Release hook from umbrella

frame as shown.

hook

umbrella frame