Assembly Instruction

HARDWARE
TOOLS REQUIRED
COMPONENTS
Made in Vietnam - r04 Page 1 of 2
1 Fit end of connector into corresponding bracket of 4 legs as
shown. Secure each leg with 2 small bolts, using an allen wrench. Do
not over tighten the bolts.
Thank you for purchasing the Valencia Oval Dining
Table. This page lists all the contents included in the
box. Please take time to identify the hardware as well as
the individual components of this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
VALENCIA
1 - tabletop
connector
4 - legs
8 - nuts
ASSEMBLY
8 - small
bolts
8 - large
bolts
1 - connector
1 - umbrella
collar
1 - umbrella
cover
leg
NOTE: Do not over
tighten the bolts
16 - flat
washers
Missing hardware? Please call
800.606.6387 for replacements.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
allen wrench
(included)
OVAL DINING TABLE
hex wrench
(included)