Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

VAUGHN ROLLING FILE

HARDWARE

TOOLS REQUIRED

Phillips head screwdriver

Made in Denmark 2004

Page 1 of 2

Thank you for purchasing the Vaughn Rolling File.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

3 - machine

screws

16 - wood

screws

3 - drawer

pulls

2 - file rods

2 - plain

casters

2 - casters

with brakes

4 - file rod brackets

1 - stem caster

1 Using 4 wood screws per caster, attach 2 casters

with brakes to the front underside of the unit and 2

plain casters to the rear underside of the unit.

2 Insert 1 stem caster into the hole on the underside

of the file drawer. Make sure caster fits snugly into hole.

Casters

with brakes

at front

Plain casters

at rear

PAGE 1
VAUGHN ROLLING FILE HARDWARE 3 - machine screws 16 - wood screws 2 - file rods 4 - file rod brackets Thank you for purchasing the Vaughn Rolling File. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
VAUGHN ROLLING FILE 3 With the assistance of another adult, place the unit in an upright position. Insert 1 machine screw through the hole in each drawer and into the drawer pull. Secure with a screwdriver. 4 Insert 2 file rod brackets onto the ends of each file rod. Adjust spacing to accommodate letter or legal size folders CLEANING AND CARE Clean wood surfaces with a damp cloth. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer.