Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Wells Chiffonier

ASSEMBLY HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Vietnam - r04 Page 1 of 4

Thank you for purchasing the Wells Chiffonier. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

WELLS CHIFFONIER

Missing hardware?

Please call 800.606.6387

for replacements.

phillips head screwdriver

(We recommend the use of hand tools instead of power tools)

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

14 - wood

dowels

12 - pull

bolts

19 - cam

screws

27 - back

screws

48 - drawer

screws

19 - cams

6 - pulls

2 - side panels

(1 left, 1 right)

1 - top panel

1 - bottom panel

1 - top crossbar

2 - bottom crossbars

6 - drawer bottoms

6 - drawer backs

(2 small, 2 medium, 2 large)

12 - drawer sides

(4 small left/right, 4 medium left/right,

4 large left/right)

6 - drawer fronts

(labeled A-F)

1 - back

panel

1 - washer

WALL MOUNTING HARDWARE

1 - wall

strap

1 - wall

screw

Summary of content (4 pages)

PAGE 1
WELLS CHIFFONIER ASSEMBLY HARDWARE 19 - cam screws 14 - wood dowels 19 - cams 12 - pull bolts 27 - back screws 48 - drawer screws Missing hardware? Please call 800.606.6387 for replacements. WALL MOUNTING HARDWARE Thank you for purchasing the Wells Chiffonier. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
WELLS CHIFFONIER NOTE: Make sure arrow on each cam points toward nearest edge with holes A A top panel NOTE: Do not over tighten the cam screw top crossbar B B bottom panel bottom crossbar 1 A) Insert 6 cams, 1 cam screw and 4 wood dowels into top panel as shown. Make sure arrow on each cam points toward nearest edge with holes. Secure, but do not over tighten, cam screws with a phillips head screwdriver. B) Insert 6 cams and 4 wood dowels into bottom panel as shown.
PAGE 3
WELLS CHIFFONIER top crossbar NOTE: Do not over tighten the screws bottom crossbars left side panel top panel back panel bottom panel NOTE: Make sure wheels of glides face forward as shown right side panel 5 Fit dowels of top panel, bottom panel, top crossbar and bottom crossbars into corresponding holes of left side panel as shown. Secure all cams. Repeat steps for right side panel. A 6 Attach back panel to assembly with 27 back screws, using a screwdriver. Do not over tighten the screws.
PAGE 4
WELLS CHIFFONIER B pull A B C A small drawer back D E NOTE: Do not over tighten the bolts 9 A) Attach small drawer back to corresponding small drawer assembly with 4 drawer screws as shown. B) Attach 1 pull to drawer front A with 2 pull bolts, using a screwdriver. Do not over tighten the bolts. Repeat step 9 for remaining small (A/B), medium (C/D) and large (E/F) drawer assemblies.