Manualshelf

Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Wentworth Desk
12
HARDWARE
TOOLS REQUIRED
COMPONENTS
Made in Vietnam - r07 Page 1 of 2
Thank you for purchasing the Wentworth Desk. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
WENTWORTH DESK
Missing hardware?
Please call 800.606.6387 for replacements.
8 - phillips
bolts
10 - spring
washers
10 - flat
washers
phillips head screwdriver
allen wrench (included)
(We recommend the use of hand tools instead of power tools)
2 - side frames
(1 left, 1 right)
1 - desktop
assembly
(drawer assembly
pre-assembled)
1 - crossbar
2 - allen
bolts
2 - crossbar
brackets
1 Fully extend drawer assembly from desktop assembly.
Locate plastic tabs on left and right drawer glides. With even
pressure, simultaneously lift the left tab (A) and press the right
tab (B) to release drawer assembly from assembled unit. Set
drawer aside.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
B
A
left drawer
glide
right drawer
glide
drawer
assembly
desktop
assembly

Summary of content (2 pages)