Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

1 Remove the 2 side drawers from the table top assembly.

WINSLOW WORK ISLAND

HARDWARE

TOOLS REQUIRED

Small allen wrench (included)

Large allen wrench (included)

COMPONENTS

Made in Thailand 2004

Page 1 of 3

7 - large bolts

1 - tabletop assembly

1 - left leg

frame

1 - shelf

Missing hardware? Please call 800.606.6387 for

replacements.

1 - wine rack

5 - small bolts

Thank you for purchasing the Winslow Work Island.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this

product.

2 - towel bar

brackets

1 - towel bar

5 - wood screws

1 - right leg

frame

Note extra

holes for

towel bar

PAGE 1
WINSLOW WORK ISLAND HARDWARE 7 - large bolts 5 - small bolts 5 - wood screws Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Winslow Work Island. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
WINSLOW WORK ISLAND x3 B Apron blocks A 2 A. Attach 1 towel bar bracket onto the outside of the left leg frame with 2 wood screws. Secure with allen wrench. B. Fit towel bar into hole on inside of towel bar bracket. Fit other end of towel bar into remaining towel bar bracket and secure the assembly to the leg frame with 2 wood screws. 3 With the assistance of another adult, place tabletop upside down on a padded surface.
PAGE 3
WINSLOW WORK ISLAND 6 Fit remaining right leg frame onto tenons of wine rack and shelf. Secure to the tabletop with 3 large bolts and to the shelf with 2 small bolts. Fully tighten all bolts. 7 With the assistance of another adult, lift assembly into an upright position. Pull out middle drawer half-way and rotate drawer stop at the back of the drawer into a vertical position as shown. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.