Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Work 36-Bottle Wine Rack

HARDWARE

COMPONENTS

ASSEMBLY

Made in Taiwan - r03 Page 1 of 2

1 A) Attach top leg to bottom leg with 1 threaded

connector. Turn top leg counterclockwise to

secure.

B) Attach 1 foot to bottom leg by turning each

counterclockwise to secure. Repeat for remaining

top and bottom legs.

Thank you for purchasing the Work Wine Rack 36

Bottle. This page lists all the contents included in the

box. Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the contents on

a carpeted or padded area to protect them from damage.

WORK WINE RACK 36 BOTTLE

4 - feet

wine rack

shelf

socket

bracket

NOTE: Make sure

feet are facing down

as shown

4 - threaded

connectors

threaded

connector

4 - top legs 4 - bottom legs 6 - wine rack

shelves

24 - socket

brackets

top leg

bottom leg

foot

2 A) Fit 1 plug bracket and 1 socket bracket onto groove of

each assembled leg as shown. Make sure brackets snap-fit

together.

B) Fit assembled legs into corresponding holes of 1 wine rack

shelf. Slide wine rack shelf over brackets and press down

firmly to secure. Repeat steps for 4 wine rack shelves.

24 - plug

brackets

NOTE: Make sure

wine rack shelf

faces up as shown

plug

bracket

groove

Missing hardware? Please call

800.606.6387 for replacements.

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (2 pages)

PAGE 1
WORK WINE RACK 36 BOTTLE HARDWARE 4 - threaded connectors 24 - plug brackets 24 - socket brackets 4 - feet Missing hardware? Please call 800.606.6387 for replacements. COMPONENTS Thank you for purchasing the Work Wine Rack 36 Bottle. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
WORK WINE RACK 36 BOTTLE plug bracket socket bracket wine rack shelf groove CLEANING AND CARE Clean surfaces with a dry soft cloth. Do not use abrasive cleaners. 3 A) Positioned assembled unit upright. Attach 1 plug bracket and 1 socket bracket to groove of each assembled leg as shown. B) Fit assembled legs into corresponding holes of remaining wine rack shelf. Slide wine rack shelf over brackets. Assembly is now complete. Made in Taiwan - r03 Customer Service 800.967.