Assembly Instruction

ManualsBrandsCrate & Barrel ManualsAccessoriesCrate & Barrel Work Closet

HARDWARE

COMPONENTS

TOOLS REQUIRED

ASSEMBLY

Made in Taiwan - r03 Page 1 of 3

Thank you for purchasing the Work Closet. This page

lists all the contents included in the box. Please take time

to identify the hardware as well as the individual compo-

nents of this product. As you unpack and prepare for

assembly, place the contents on a carpeted or padded

area to protect them from damage.

Note: 2 people are required to safely assemble this product.

WORK CLOSET

6 - threaded

connectors

30 - socket

brackets

1 A) Attach top leg to bottom leg with 1 threaded

connector. Secure by turning top leg clockwise.

Repeat for all remaining top and bottom legs.

B) Attach 6 adjustable feet to bottom leg of leg assembly

as shown. Secure but turning each leg counter clockwise.

30 - plug

brackets

6 - top legs 6 - bottom

legs

1 - hanging

crossbar

phillips head screwdriver

(not included)

bottom leg

3 - small

shelves

3 - large

shelves

top leg

threaded

connector

2 - bolts 6 - adjustable

feet

(We recommend the use of hand tools instead of power tools)

2 - hanging

brackets

adjustable foot

Missing hardware? Please call

800.606.6387 for replacements.

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (3 pages)

PAGE 1
WORK CLOSET HARDWARE TO P 2 - bolts 6 - adjustable 6 - threaded 30 - plug 30 - socket connectors brackets brackets feet Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the Work Closet. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
WORK CLOSET 2 A) Fit 1 plug bracket and 1 socket bracket onto groove of each assembled leg as shown. Make sure brackets snap-fit securely together. B) Fit assembled legs into corresponding holes of 1 large shelf. Slide large shelf over brackets and press down firmly to secure. plug bracket socket bracket TO P B large shelf A groove A NOTE: Make sure shelf faces up as shown small shelf A 3 A) With the assistance of another adult, place assemble unit upright.
PAGE 3
WORK CLOSET B large shelf C hanging brackets hanging crossbar A D 4 A) Fit 1 plug bracket and 1 socket bracket to groove of each assembled leg as shown. B) Fit assembled legs into corresponding holes of 1 large shelf. Slide large shelf over brackets and press down firmly to secure. C) Attach 2 hanging brackets to hanging crossbar with 2 bolts as shown. Secure, but do not over tighten, bolts using a phillips head screwdriver. D) Fit hook of hanging brackets into large shelf as shown.