Instruction manual

6
3.4 Leveling: The unit must sit level and solidly. Leveling feet are supplied and
must be installed in the four holes in the bottom corners of the unit. With
the feet installed and the unit standing upright, each foot can be raised by
turning it in a counterclockwise direction. Adjust the foot at each corner
until the unit stands level and solid without rocking. If the unit must be
moved, turn the leveling feet all the way clockwise to prevent damage while
moving.
3.5 Cleaning: The unit chamber should be cleaned and disinfected prior to
use. Remove shelving and shelving supports and clean thoroughly,
including all corners using a suitable disinfectant that is appropriate to your
application. Regular periodic cleaning is required. Special care should be
taken when cleaning around sensing heads to prevent damage. DO NOT
use chlorine-based bleaches or abrasive cleaners as this will damage the
stainless steel interior.
3.6 Place shelves in the chamber as desired.