Owner`s manual

V100H Tube Guitar Amplifier with Reverb
14
Declaration Of Conformity
Manufacturer: LOUD Technologies Inc.
16220 Wood-Red Rd. NE
Woodinville, WA 98072, USA
Product Name: Crate V100H
Product Type: Audio Amplifier
Complies with Standards:
LVD: 92/31/EEC, 93/68/EEC, & 73/23/EWG
Safety: EN60065
EMC: EN55013, EN55020, EN55022, EN55103, EN61000-3-2,
& EN61000-3-3
The official Declaration of Conformity for this product is kept on file at:
LOUD Technologies Inc., 16220 Wood-Red Road NE, Woodinville, WA 98072 • Tel: [phone]
Service Information
If you are having a problem with your V100H, you can go to our website (www.crateamps.com)
and click on Support for service information, or call 1-800-898-3211 during business hours
(7
am to 5 pm PST, Monday-Friday). If you are outside of the U.S., contact your local distribu-
tor for technical support and service.
If the V100H doesn’t turn on when the Power switch is turned on, it is possible that the fuse
may have blown. Try replacing the fuse following the instructions below. If the fuse blows
again, there may be something more seriously wrong that will require an experienced techni-
cian to correct.
To remove and replace the fuse:
1. Disconnect the power cord from the AC socket on the rear panel.
2. Remove the fuse drawer by prying it open with a small screwdriver. It will slide all the
way out.
FUSE
3. Remove the fuse and replace it with an equivalent type fuse:
5 amp slo-blo (T5A/250V)